- Description
Dock Edge Toon Fender Std 6" x 36" PVC Beige
The Toon Fender™ is the first fender designed especially for pontoon
boats. It is designed to attach to various deck styles and contains a
dual hooking system to keep the fender from popping up and flying
around. This 6″ x 36″ PVC molded fender has an attachment system that is
adjustable so you can hook the fender on the rail and adjust it up or
down. It also has a bottom hook that connects to any of the eight receiver
attachments that are built into the PVC fender. This hook design will
attach to the aluminum trim around the deck of the pontoon boat. In
addition, there is a block of 6″ x 6″ E.V.A. foam with velcro attached
to the fender for easy adjustment and additional protection. Finally,
an aluminum hook “stops” that prevents the fender from sliding on the rub
rail.
Features:
A complete system: There is no need to buy extra attachment devices or rope.
No need to remove: Double hook attachment will keep the fender from
rolling around or popping up, there is no need to store the fender.
Over 36″ long, adjusts from 17″ to 34″ attachment: Protects from
above the top railing to 4 to 5 inches below the floor trim, or can be
adjusted to protect the pontoons themselves.
Protects below the water line: This is the only fender that can
protect below the water line and does not float up like typical round
fenders would.
Protects above the attachment point: This is the only fender that
can protect above the attachment point leaving no area for docks or
boats to catch. Ropes and attachment points of typical fenders are
normally the catch points for docks and can be both dangerous and
damaging to the boat and passengers.
Tapered design: The shape of this fender sheds water and other objects off or away from the boat.
A thin top stainless steel hook allows it to be attached between cushion upholstery: impossible with a typical rope attachment.
Size : 6" x 36"
Color: Beige
