{"title":"Drive and Gearcase Parts","description":"\u003cstrong\u003eSteveston Marine \u0026amp; Hardware\u003c\/strong\u003e has a selection of Drive and Gearcase Parts for you! We have products from \u003cstrong\u003ePSS\u003c\/strong\u003e and \u003cstrong\u003eSierra\u003c\/strong\u003e. Shop in one of our stores located in \u003cstrong\u003eVancouver\u003c\/strong\u003e or \u003cstrong\u003eLangley\u003c\/strong\u003e! Or order online and receive \u003cstrong\u003eFREE SHIPPING\u003c\/strong\u003e on orders over $99! (Some exceptions may apply)\n","products":[{"product_id":"sierra-e-j-seal-kit-396349","title":"Sierra E\/J Seal Kit 396349","description":"Johnson\/Evinrude Lower Unit Seal Kit\u003cbr\u003e  \u003cbr\u003e \u003cbr\u003eDescription : Lower Unit Seal Kit: Evinrude\/Johnson 3 cyl. \u003cbr\u003e Replaces : 396349","brand":"Sierra","offers":[{"title":"Default Title","offer_id":47334420381925,"sku":"18-2660","price":103.59,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/blank_10b14924-404b-4066-992d-8975196309db.jpg?v=1753542580"},{"product_id":"sierra-gimbal-bearing-omc-vp-3853807","title":"Sierra Gimbal Bearing-Omc\/Vp#3853807","description":"\u003cp\u003eOMC Sterndrive\/Cobra\u003cbr\u003e\nOMC Volvo\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nReplaces : Merc 805536A2, 30-60794A4\u003cbr\u003e\nVolvo 3853807\u003cbr\u003e\nOMC 3853807, 983937\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":47563019354341,"sku":"2100","price":153.23,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/sierra-gimbal-bearing-omc-vp-3853807-38273_9624afe5-18d4-45de-a770-fe7253b90134.jpg?v=1759568478"},{"product_id":"sierra-bearing-gimbal-mc-vp-388555","title":"Sierra Bearing-Gimbal Mc-Vp 388555","description":"\u003cp\u003eFits: MC-1, R, MR and Alpha(1974-97), Gen II(1991-97), Bravo I\/II\/III (1988-95)\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nReplaces : 30-879194A02\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":47563019387109,"sku":"21001","price":314.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/sierra-bearing-gimbal-mc-vp-388555-38274_8386e121-6668-4c98-a1c9-127a6b8c1b55.jpg?v=1759568480"},{"product_id":"sierra-trim-hose-pcm-ro85035-amp-mc","title":"Sierra Trim Hose - Pcm#Ro85035 \u0026 Mc","description":"Sterndrive Power Trim Hose\u003cbr\u003e  \u003cbr\u003e \u003cbr\u003eSize : 14\" L x 1\/8\" W \u003cbr\u003e Replaces : PCM #: RO85035, Mercruiser #: 32-86036Q","brand":"Sierra","offers":[{"title":"Default Title","offer_id":47563019419877,"sku":"18-2103","price":86.62,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/sierra-trim-hose-pcm-ro85035-and-mc-38275.jpg?v=1755501802"},{"product_id":"sierra-u-joint-om-915716-vp-897707-6","title":"Sierra U-Joint Om#915716 Vp#897707-6","description":"\u003cp\u003eHeavy duty U-Joint with straight and 90\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":47563019452645,"sku":"18-2104","price":95.02,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/sierra-u-joint-om-915716-vp-897707-6-38276_649e33c7-9c25-46ce-8079-45e2494074c3.jpg?v=1759568484"},{"product_id":"sierra-u-joint-omc-volvo-385081282","title":"Sierra U-Joint - Omc\/Volvo#385081282","description":"\u003cp\u003eHeavy duty U-Joint with straight and 90\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":47563019518181,"sku":"2174","price":151.23,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/sierra-u-joint-omc-volvo-385081282-38277_7443f878-89f1-4e4f-9f11-49dad5982dce.jpg?v=1759568486"},{"product_id":"sierra-p-ball-gear-kit","title":"Sierra P Ball Gear Kit","description":"OMC Ball Gear Kit\u003cbr\u003e  \u003cbr\u003e \u003cbr\u003eDescription : Ball Gear Kit: OMC 1973-86","brand":"Sierra","offers":[{"title":"Default Title","offer_id":47563019616485,"sku":"2178","price":299.23,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/sierra-p-ball-gear-kit-38281.jpg?v=1755501810"},{"product_id":"sierra-spring-clutch-omc-e-j-324369","title":"Sierra Spring Clutch Omc E J 324369","description":"For V-4 \u0026amp; V-6\u003cbr\u003eReplaces: 324369\u003cbr\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":47563024924901,"sku":"2399","price":5.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/sierra-spring-clutch-omc-e-j-324369-38409.jpg?v=1755501992"},{"product_id":"sierra-seal-kit-upper-gc-vp-3850594","title":"Sierra Seal Kit Upper Gc Vp 3850594","description":"\u003cp\u003eUpper Unit Seal Kit\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nDescription : Upper Unit Seal Kit - Volvo SX Thru 2006, 3850594\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":47563025023205,"sku":"2586","price":124.65,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/sierra-seal-kit-upper-gc-vp-3850594-38411_ad89cd2a-20b2-4dd1-8933-7985da7ff148.jpg?v=1759568663"},{"product_id":"sierra-cobra-o-d-mtg-gasket-set","title":"Sierra Cobra O\/D Mtg Gasket Set","description":"\u003cb\u003eContains:\u003c\/b\u003e\u003cbr\u003e  \u003cbr\u003e \u003cbr\u003eReplaces : 508105","brand":"Sierra","offers":[{"title":"Default Title","offer_id":47563025383653,"sku":"18-2613","price":10.24,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/sierra-cobra-o-d-mtg-gasket-set-38415.jpg?v=1755502002"},{"product_id":"sierra-seal-kit-lower-gc-e-j-439141","title":"Sierra Seal Kit-Lower Gc E\/J#439141","description":"\u003cp\u003eJohnson\/Evinrude Lower Unit Seal Kit\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nDescription : Lower Unit Seal Kit: Evinrude\/Johnson V4-V6 \u003cbr\u003e\n Replaces : 439141\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":47563025449189,"sku":"2623","price":223.53,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/sierra-seal-kit-lower-gc-e-j-439141-38416_78b7c175-5f72-4016-ba2e-4973fab6fc00.jpg?v=1759568668"},{"product_id":"sierra-gasket-kit-volvo-drive-875192","title":"Sierra Gasket Kit Volvo Drive 875192","description":"Volvo Drive Unit Seal Kit\u003cbr\u003e  \u003cbr\u003e \u003cbr\u003eDescription : Complete Seal Kit: VP AQ200-AQ290 \u003cbr\u003e Replaces : 875192-7","brand":"Sierra","offers":[{"title":"Default Title","offer_id":47563025613029,"sku":"2625","price":161.53,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/sierra-gasket-kit-volvo-drive-875192-38417.jpg?v=1755502005"},{"product_id":"sierra-seal-kit-upper-gc-omc-cobra","title":"Sierra Seal Kit-Upper Gc Omc Cobra","description":"\u003cp\u003eIncludes: Water Pump Base Gasket O.E.# 911698, Water Cover Gasket O.E.# 911733, Grommet O.E.# 911705, Oil Seal O.E.# 911685, Oil Seal O.E.# 911701, 916058, 915000, Rubber Seal O.E.# 911704, Water Pump Housing Gasket O.E.# 911702, Outdrive Gasket O.E.# 915840, Seal O.E.# 911823, O-Ring O.E.# 313175, O-Ring O.E.# 303067, O-Ring O.E.# 318717(2), O-Ring O.E.# N\/A (2) O-Ring O.E.# 911686, O-Ring O.E.# 909316, O-Ring O.E.# 911700\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nReplaces : 984459, 986364, 987603\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":47563025711333,"sku":"18-2673","price":112.78,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/sierra-seal-kit-upper-gc-omc-cobra-38418_a78fc485-5133-40fb-9fe6-fdb89fe1a553.jpg?v=1759568669"},{"product_id":"sierra-omc-volvo-sx-o-d-mounting-kit","title":"Sierra Omc Volvo Sx O\/D Mounting Kit","description":"Use 18-2362 mounting nuts.\u003cbr\u003eContains: O-ring SIE 7513 and 2 outdrive seals SIE 2996.\u003cbr\u003e  \u003cbr\u003e \u003cbr\u003eFits : Volvo SX Drives","brand":"Sierra","offers":[{"title":"Default Title","offer_id":47563025842405,"sku":"18-2699","price":9.15,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/sierra-omc-volvo-sx-o-d-mounting-kit-38419.jpg?v=1755502008"},{"product_id":"sierra-p-vo-exh-bellows","title":"Sierra P Vo Exh Bellows","description":"Replaces: 875828-6, 876633-9, AQ175, 280, 280DP, T, PT, AQD40, AQAD40, V-8\u003cbr\u003e ","brand":"Sierra","offers":[{"title":"Default Title","offer_id":47563026006245,"sku":"18-2757","price":255.83,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/sierra-p-vo-exh-bellows-38422.jpg?v=1755502013"},{"product_id":"sierra-875848-4-vol-exhaust-bel-kit","title":"Sierra 875848 4 Vol Exhaust Bel Kit","description":"\u003cp\u003eReplaces: 875848-4, AQ200, 250, 275, 280, 280DP, 290, 290DP\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":47563026039013,"sku":"2758","price":168.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/sierra-875848-4-vol-exhaust-bel-kit-38423_51925a7f-ff9e-458e-a1f5-be6153d62959.jpg?v=1759568671"},{"product_id":"sierra-u-joint-bellows-omc-987467","title":"Sierra U-Joint Bellows Omc 987467","description":"\u003cp\u003eReplaces: 983973, 987467, 3854127\u003cbr\u003e\nAll Cobra\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":47563026137317,"sku":"18-2765","price":91.3,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/sierra-u-joint-bellows-omc-987467-38426_f0718878-7afa-426d-aec6-bbe895b8dc4d.jpg?v=1759568673"},{"product_id":"sierra-313080-omc-transom-seal","title":"Sierra 313080 Omc Transom Seal","description":"Transom Seal\u003cbr\u003e  \u003cbr\u003e \u003cbr\u003eDescription : OMC Sterndrive\/Cobra - 120 hp \u0026amp; Up ('67-'77) \u003cbr\u003e Replaces : 313080","brand":"Sierra","offers":[{"title":"Default Title","offer_id":47563026202853,"sku":"18-2767","price":281.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/sierra-313080-omc-transom-seal-38428.jpg?v=1755502021"},{"product_id":"sierra-transom-seal-omc-400-800-ser","title":"Sierra Transom Seal Omc 400-800 Ser","description":"\u003cp\u003eTransom Seal\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nDescription : OMC Sterndrive\/Cobra - All ('78-'86) \u003cbr\u003e\n Replaces : 909527\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":47563026235621,"sku":"18-2768","price":314.31,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/sierra-transom-seal-omc-400-800-ser-38429_0231a73e-16e0-4087-92c0-e82ac45c55f5.jpg?v=1759568676"},{"product_id":"sierra-volvo-omc-sx-transom-seal-kit","title":"Sierra Volvo Omc Sx Transom Seal Kit","description":"Transom Seal Kit\u003cbr\u003e  \u003cbr\u003e \u003cbr\u003eApplication : OMC Sterndrive\/Cobra\u003cbr\u003e\u0026amp; Volvo SX cobra drives\u003cbr\u003ewith cone clutch \u003cbr\u003e Contains : Gimbal Bearing 2100, Bellows 2765, Bellows 1074, Seal 2996, Hose Clamp 7315","brand":"Sierra","offers":[{"title":"Default Title","offer_id":47563026268389,"sku":"27721","price":385.17,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/sierra-volvo-omc-sx-transom-seal-kit-38431.jpg?v=1755502027"},{"product_id":"sierra-850888-9-volvo-plastic-washer","title":"Sierra 850888 9 Volvo Plastic Washer","description":"\u003cp\u003eVolvo Plastic Washer\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\nDescription : Plastic washer \u003cbr\u003e\n Replaces : 850888-9\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":47563031707877,"sku":"4211","price":14.65,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/sierra-850888-9-volvo-plastic-washer-38577_097ac912-0a0f-45c7-b827-ef652e556845.jpg?v=1759568802"},{"product_id":"pyi-1-1-8-quot-28mm-o-ring-kit-07-n11-18","title":"pyi-1-1-8-quot-28mm-o-ring-kit-07-n11-18","description":"\u003cp\u003eYou may find that you will need to replace the o-rings inside the stainless steel rotor of your PSS Shaft Seal. The \u003cb\u003ePYI O-Ring Kit\u003c\/b\u003e comes with everything you need to get the job done!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Includes:\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul style=\"border: none; margin-left: 30px;\"\u003e\n\u003cli style=\"list-style-type: disc; border: none; line-height: 18px;\"\u003eAllen wrench\u003c\/li\u003e\n\u003cli style=\"list-style-type: disc; border: none; line-height: 18px;\"\u003eSet screws x5\u003c\/li\u003e\n\u003cli style=\"list-style-type: disc; border: none; line-height: 18px;\"\u003eO-rings x2\u003c\/li\u003e\n\u003cli style=\"list-style-type: disc; border: none; line-height: 18px;\"\u003eClamp Jackets x4\u003c\/li\u003e\n\u003cli style=\"list-style-type: disc; border: none; line-height: 18px;\"\u003eThread lock\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PYI","offers":[{"title":"Default Title","offer_id":47571231604965,"sku":"Sku 162114","price":9.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/O-Ring-Kit.jpg?v=1755694125"},{"product_id":"pyi-pss-shaft-seal-1-shaft-and-1-3-4-tube-02-100-134","title":"PYI - PSS Shaft Seal - 1\" Shaft and 1-3\/4\" Tube - 02-100-134","description":"\u003cp\u003eThe PSS Shaft Seal\u003cbr\u003e\nis a mechanical face seal. The sealing surface is created between the flat surfaces of the rotating stainless-steel rotor and the stationary carbon flange. The stationary carbon flange is attached to the front side of the bellows with hose clamps, and the back end of the bellows fits over the Stern tube and is secured with hose clamps. The stainless-steel rotor is fitted on the shaft in front of the carbon flange. The stainless-steel rotor compresses the bellows before the rotor is secured to the shaft with set screws. This compression (pre-load) maintains constant contact between the two flat faces of the stainless-steel rotor and carbon flange, allowing the PSS to compensate for the variable fore and aft movement due to propeller thrust. In addition, the carbon flange is over-bored to the shaft diameter allowing it to “float” around the shaft and thus compensate for most misalignment and vibration problems. The stainless-steel rotor is sealed to the shaft by two O-rings recessed into the collar's bore. These O-rings rotate with the shaft and stainless-steel rotor and do not experience wear during operation.\u003cbr\u003e\nSpecifications:\u003cbr\u003e\nTemperature Limits\u003cbr\u003e\n5°F to 225°F (-15°C to 107°C)\u003cbr\u003e\nPressure Limits\u003cbr\u003e\n15 PSI (1 BAR)\u003cbr\u003e\nShaft RPM Limits\u003cbr\u003e\n10,000 RPM\u003c\/p\u003e","brand":"Pyi","offers":[{"title":"Default Title","offer_id":47607319429349,"sku":"SKU 162104","price":452.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/PSS-TypeA-ShaftSeal_753601c0-dde5-4b05-a33b-d29c3680cf41.jpg?v=1759488406"},{"product_id":"pyi-pss-shaft-seal-1-shaft-and-2-tube-02-100-200","title":"PYI - PSS Shaft Seal - 1\" Shaft and 2\" Tube - 02-100-200","description":"\u003cp\u003eThe PSS Shaft Seal\u003cbr\u003e\nis a mechanical face seal. The sealing surface is created between the flat surfaces of the rotating stainless-steel rotor and the stationary carbon flange. The stationary carbon flange is attached to the front side of the bellows with hose clamps, and the back end of the bellows fits over the Stern tube and is secured with hose clamps. The stainless-steel rotor is fitted on the shaft in front of the carbon flange. The stainless-steel rotor compresses the bellows before the rotor is secured to the shaft with set screws. This compression (pre-load) maintains constant contact between the two flat faces of the stainless-steel rotor and carbon flange, allowing the PSS to compensate for the variable fore and aft movement due to propeller thrust. In addition, the carbon flange is over-bored to the shaft diameter allowing it to “float” around the shaft and thus compensate for most misalignment and vibration problems. The stainless-steel rotor is sealed to the shaft by two O-rings recessed into the collar's bore. These O-rings rotate with the shaft and stainless-steel rotor and do not experience wear during operation.\u003cbr\u003e\nSpecifications:\u003cbr\u003e\nTemperature Limits\u003cbr\u003e\n5°F to 225°F (-15°C to 107°C)\u003cbr\u003e\nPressure Limits\u003cbr\u003e\n15 PSI (1 BAR)\u003cbr\u003e\nShaft RPM Limits\u003cbr\u003e\n10,000 RPM\u003c\/p\u003e","brand":"Pyi","offers":[{"title":"Default Title","offer_id":47607319494885,"sku":"SKU 162105","price":452.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/PSS-TypeA-ShaftSeal_c2e051d3-4f4b-4aa8-b0b6-7bcc2c47588d.jpg?v=1759488405"},{"product_id":"pyi-pss-shaft-seal-3-shaft-and-3-3-4-tube-02-300-434","title":"PYI - PSS Shaft Seal - 3\" Shaft and 3-3\/4\" Tube - 02-300-434","description":"\u003cp\u003eThe PSS Shaft Seal\u003cbr\u003e\nis a mechanical face seal. The sealing surface\u003cbr\u003e\nis created between the flat surfaces of the rotating stainless-steel\u003cbr\u003e\nrotor and the stationary carbon flange. The stationary carbon flange is\u003cbr\u003e\nattached to the front side of the bellows with hose clamps, and the back\u003cbr\u003e\nend of the bellows fits over the Stern tube and is secured with hose\u003cbr\u003e\nclamps. The stainless-steel rotor is fitted on the shaft in front of the\u003cbr\u003e\ncarbon flange. The stainless-steel rotor compresses the bellows before\u003cbr\u003e\nthe rotor is secured to the shaft with set screws. This compression\u003cbr\u003e\n(pre-load) maintains constant contact between the two flat faces of the\u003cbr\u003e\nstainless-steel rotor and carbon flange, allowing the PSS to compensate\u003cbr\u003e\nfor the variable fore and aft movement due to propeller thrust. In\u003cbr\u003e\naddition, the carbon flange is over-bored to the shaft diameter allowing\u003cbr\u003e\nit to “float” around the shaft and thus compensate for most\u003cbr\u003e\nmisalignment and vibration problems. The stainless-steel rotor is sealed\u003cbr\u003e\nto the shaft by two O-rings recessed into the collar's bore. These\u003cbr\u003e\nO-rings rotate with the shaft and stainless-steel rotor and do not\u003cbr\u003e\nexperience wear during operation.\u003cbr\u003e\nSpecifications:\u003cbr\u003e\nTemperature Limits\u003cbr\u003e\n5°F to 225°F (-15°C to 107°C)\u003cbr\u003e\nPressure Limits\u003cbr\u003e\n15 PSI (1 BAR)\u003cbr\u003e\nShaft RPM Limits\u003cbr\u003e\n10,000 RPM\u003c\/p\u003e","brand":"Pyi","offers":[{"title":"Default Title","offer_id":47607319527653,"sku":"SKU 000084","price":1435.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/PSS-TypeA-ShaftSeal_6d0638fb-9da0-41e5-8e61-35c979f0867e.jpg?v=1759488443"},{"product_id":"pyi-pss-shaft-seal-30mm-shaft-and-1-5-tube-02-30m-112","title":"PYI - PSS Shaft Seal - 30mm Shaft and 1.5\" Tube - 02-30M-112","description":"\u003cp\u003eThe PSS Shaft Seal\u003cbr\u003e\nis a mechanical face seal. The sealing surface is created between the flat surfaces of the rotating stainless-steel rotor and the stationary carbon flange. The stationary carbon flange is attached to the front side of the bellows with hose clamps, and the back end of the bellows fits over the Stern tube and is secured with hose clamps. The stainless-steel rotor is fitted on the shaft in front of the carbon flange. The stainless-steel rotor compresses the bellows before the rotor is secured to the shaft with set screws. This compression (pre-load) maintains constant contact between the two flat faces of the stainless-steel rotor and carbon flange, allowing the PSS to compensate for the variable fore and aft movement due to propeller thrust. In addition, the carbon flange is over-bored to the shaft diameter allowing it to “float” around the shaft and thus compensate for most misalignment and vibration problems. The stainless-steel rotor is sealed to the shaft by two O-rings recessed into the collar's bore. These O-rings rotate with the shaft and stainless-steel rotor and do not experience wear during operation.\u003cbr\u003e\nSpecifications:\u003cbr\u003e\nTemperature Limits\u003cbr\u003e\n5°F to 225°F (-15°C to 107°C)\u003cbr\u003e\nPressure Limits\u003cbr\u003e\n15 PSI (1 BAR)\u003cbr\u003e\nShaft RPM Limits\u003cbr\u003e\n10,000 RPM\u003c\/p\u003e","brand":"Pyi","offers":[{"title":"Default Title","offer_id":47607319593189,"sku":"SKU 162101","price":452.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/PSS-TypeA-ShaftSeal_31d2dd70-d151-4291-8430-769a3efcff33.jpg?v=1759488493"},{"product_id":"pyi-pss-shaft-seal-30mm-shaft-and-2-tube-02-30m-112","title":"PYI - PSS Shaft Seal - 30mm Shaft and 2\" Tube - 02-30M-112","description":"\u003cp\u003eThe PSS Shaft Seal\u003cbr\u003e\nis a mechanical face seal. The sealing surface is created between the flat surfaces of the rotating stainless-steel rotor and the stationary carbon flange. The stationary carbon flange is attached to the front side of the bellows with hose clamps, and the back end of the bellows fits over the Stern tube and is secured with hose clamps. The stainless-steel rotor is fitted on the shaft in front of the carbon flange. The stainless-steel rotor compresses the bellows before the rotor is secured to the shaft with set screws. This compression (pre-load) maintains constant contact between the two flat faces of the stainless-steel rotor and carbon flange, allowing the PSS to compensate for the variable fore and aft movement due to propeller thrust. In addition, the carbon flange is over-bored to the shaft diameter allowing it to “float” around the shaft and thus compensate for most misalignment and vibration problems. The stainless-steel rotor is sealed to the shaft by two O-rings recessed into the collar's bore. These O-rings rotate with the shaft and stainless-steel rotor and do not experience wear during operation.\u003cbr\u003e\nSpecifications:\u003cbr\u003e\nTemperature Limits\u003cbr\u003e\n5°F to 225°F (-15°C to 107°C)\u003cbr\u003e\nPressure Limits\u003cbr\u003e\n15 PSI (1 BAR)\u003cbr\u003e\nShaft RPM Limits\u003cbr\u003e\n10,000 RPM\u003c\/p\u003e","brand":"Pyi","offers":[{"title":"Default Title","offer_id":47607319625957,"sku":"SKU 162102","price":452.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/PSS-TypeA-ShaftSeal_5b23cf51-83ee-4164-84e5-2cf34cc6dd35.jpg?v=1759488441"},{"product_id":"pyi-pss-shaft-seal-7-8-shaft-and-2-tube-02-078-200","title":"PYI - PSS Shaft Seal - 7\/8\" Shaft and 2\" Tube - 02-078-200","description":"\u003cp\u003eThe PSS Shaft Seal\u003cbr\u003e\nis a mechanical face seal. The sealing surface is created between the flat surfaces of the rotating stainless-steel rotor and the stationary carbon flange. The stationary carbon flange is attached to the front side of the bellows with hose clamps, and the back end of the bellows fits over the Stern tube and is secured with hose clamps. The stainless-steel rotor is fitted on the shaft in front of the carbon flange. The stainless-steel rotor compresses the bellows before the rotor is secured to the shaft with set screws. This compression (pre-load) maintains constant contact between the two flat faces of the stainless-steel rotor and carbon flange, allowing the PSS to compensate for the variable fore and aft movement due to propeller thrust. In addition, the carbon flange is over-bored to the shaft diameter allowing it to “float” around the shaft and thus compensate for most misalignment and vibration problems. The stainless-steel rotor is sealed to the shaft by two O-rings recessed into the collar's bore. These O-rings rotate with the shaft and stainless-steel rotor and do not experience wear during operation.\u003cbr\u003e\nSpecifications:\u003cbr\u003e\nTemperature Limits\u003cbr\u003e\n5°F to 225°F (-15°C to 107°C)\u003cbr\u003e\nPressure Limits\u003cbr\u003e\n15 PSI (1 BAR)\u003cbr\u003e\nShaft RPM Limits\u003cbr\u003e\n10,000 RPM\u003c\/p\u003e","brand":"Pyi","offers":[{"title":"Default Title","offer_id":47607319691493,"sku":"SKU 162103","price":437.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/PSS-TypeA-ShaftSeal_7c272259-820c-40aa-97c4-4d0f83c701dd.jpg?v=1759488408"},{"product_id":"pyi-pss-shaft-seal-1-1-2-shaft-and-2-3-4-tube-02-112-234","title":"PYI - PSS Shaft Seal - 1-1\/2\" Shaft and 2-3\/4\" Tube - 02-112-234","description":"\u003cp\u003eThe PSS Shaft Seal\u003cbr\u003e\nis a mechanical face seal. The sealing surface is created between the flat surfaces of the rotating stainless-steel rotor and the stationary carbon flange. The stationary carbon flange is attached to the front side of the bellows with hose clamps, and the back end of the bellows fits over the Stern tube and is secured with hose clamps. The stainless-steel rotor is fitted on the shaft in front of the carbon flange. The stainless-steel rotor compresses the bellows before the rotor is secured to the shaft with set screws. This compression (pre-load) maintains constant contact between the two flat faces of the stainless-steel rotor and carbon flange, allowing the PSS to compensate for the variable fore and aft movement due to propeller thrust. In addition, the carbon flange is over-bored to the shaft diameter allowing it to “float” around the shaft and thus compensate for most misalignment and vibration problems. The stainless-steel rotor is sealed to the shaft by two O-rings recessed into the collar's bore. These O-rings rotate with the shaft and stainless-steel rotor and do not experience wear during operation.\u003cbr\u003e\nSpecifications:\u003cbr\u003e\nTemperature Limits\u003cbr\u003e\n5°F to 225°F (-15°C to 107°C)\u003cbr\u003e\nPressure Limits\u003cbr\u003e\n15 PSI (1 BAR)\u003cbr\u003e\nShaft RPM Limits\u003cbr\u003e\n10,000 RPM\u003c\/p\u003e","brand":"Pyi","offers":[{"title":"Default Title","offer_id":47802992951525,"sku":"SKU 162108","price":685.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/PSS-TypeA-ShaftSeal_e9ccf7b9-a892-4d86-885a-b867baabe5e9.jpg?v=1759488154"},{"product_id":"pyi-pss-shaft-seal-2-1-4-shaft-and-3-3-4-tube-02-214-334","title":"PYI - PSS Shaft Seal - 2-1\/4\" Shaft and 3-3\/4\" Tube - 02-214-334","description":"\u003cp\u003eThe PSS Shaft Seal\u003cbr\u003e\nis a mechanical face seal. The sealing surface is created between the flat surfaces of the rotating stainless-steel rotor and the stationary carbon flange. The stationary carbon flange is attached to the front side of the bellows with hose clamps, and the back end of the bellows fits over the Stern tube and is secured with hose clamps. The stainless-steel rotor is fitted on the shaft in front of the carbon flange. The stainless-steel rotor compresses the bellows before the rotor is secured to the shaft with set screws. This compression (pre-load) maintains constant contact between the two flat faces of the stainless-steel rotor and carbon flange, allowing the PSS to compensate for the variable fore and aft movement due to propeller thrust. In addition, the carbon flange is over-bored to the shaft diameter allowing it to “float” around the shaft and thus compensate for most misalignment and vibration problems. The stainless-steel rotor is sealed to the shaft by two O-rings recessed into the collar's bore. These O-rings rotate with the shaft and stainless-steel rotor and do not experience wear during operation.\u003cbr\u003e\nSpecifications:\u003cbr\u003e\nTemperature Limits\u003cbr\u003e\n5°F to 225°F (-15°C to 107°C)\u003cbr\u003e\nPressure Limits\u003cbr\u003e\n15 PSI (1 BAR)\u003cbr\u003e\nShaft RPM Limits\u003cbr\u003e\n10,000 RPM\u003c\/p\u003e","brand":"Pyi","offers":[{"title":"Default Title","offer_id":47802992984293,"sku":"SKU 162136","price":1004.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/PSS-TypeA-ShaftSeal_88d3ba8a-6631-4233-990a-40486327a436.jpg?v=1759488155"},{"product_id":"pyi-pss-shaft-seal-2-1-4-shaft-and-4-tube-02-214-400","title":"PYI - PSS Shaft Seal - 2-1\/4\" Shaft and 4\" Tube - 02-214-400","description":"\u003cp\u003eThe PSS Shaft Seal\u003cbr\u003e\nis a mechanical face seal. The sealing surface is created between the flat surfaces of the rotating stainless-steel rotor and the stationary carbon flange. The stationary carbon flange is attached to the front side of the bellows with hose clamps, and the back end of the bellows fits over the Stern tube and is secured with hose clamps. The stainless-steel rotor is fitted on the shaft in front of the carbon flange. The stainless-steel rotor compresses the bellows before the rotor is secured to the shaft with set screws. This compression (pre-load) maintains constant contact between the two flat faces of the stainless-steel rotor and carbon flange, allowing the PSS to compensate for the variable fore and aft movement due to propeller thrust. In addition, the carbon flange is over-bored to the shaft diameter allowing it to “float” around the shaft and thus compensate for most misalignment and vibration problems. The stainless-steel rotor is sealed to the shaft by two O-rings recessed into the collar's bore. These O-rings rotate with the shaft and stainless-steel rotor and do not experience wear during operation.\u003cbr\u003e\nSpecifications:\u003cbr\u003e\nTemperature Limits\u003cbr\u003e\n5°F to 225°F (-15°C to 107°C)\u003cbr\u003e\nPressure Limits\u003cbr\u003e\n15 PSI (1 BAR)\u003cbr\u003e\nShaft RPM Limits\u003cbr\u003e\n10,000 RPM\u003c\/p\u003e","brand":"Pyi","offers":[{"title":"Default Title","offer_id":47802993017061,"sku":"SKU 162137","price":1004.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/PSS-TypeA-ShaftSeal_17222702-71b0-4a39-9e0c-cd0a71247c3c.jpg?v=1759488156"},{"product_id":"pyi-pss-shaft-seal-3-shaft-and-4-1-4-tube-02-300-414","title":"PYI - PSS Shaft Seal - 3\" Shaft and 4-1\/4\" Tube - 02-300-414","description":"\u003cp\u003eThe PSS Shaft Seal\u003cbr\u003e\nis a mechanical face seal. The sealing surface is created between the flat surfaces of the rotating stainless-steel rotor and the stationary carbon flange. The stationary carbon flange is attached to the front side of the bellows with hose clamps, and the back end of the bellows fits over the Stern tube and is secured with hose clamps. The stainless-steel rotor is fitted on the shaft in front of the carbon flange. The stainless-steel rotor compresses the bellows before the rotor is secured to the shaft with set screws. This compression (pre-load) maintains constant contact between the two flat faces of the stainless-steel rotor and carbon flange, allowing the PSS to compensate for the variable fore and aft movement due to propeller thrust. In addition, the carbon flange is over-bored to the shaft diameter allowing it to “float” around the shaft and thus compensate for most misalignment and vibration problems. The stainless-steel rotor is sealed to the shaft by two O-rings recessed into the collar's bore. These O-rings rotate with the shaft and stainless-steel rotor and do not experience wear during operation.\u003cbr\u003e\nSpecifications:\u003cbr\u003e\nTemperature Limits\u003cbr\u003e\n5°F to 225°F (-15°C to 107°C)\u003cbr\u003e\nPressure Limits\u003cbr\u003e\n15 PSI (1 BAR)\u003cbr\u003e\nShaft RPM Limits\u003cbr\u003e\n10,000 RPM\u003c\/p\u003e","brand":"Pyi","offers":[{"title":"Default Title","offer_id":47802993049829,"sku":"SKU 162138","price":1435.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/PSS-TypeA-ShaftSeal_b77685b5-fa96-4d4a-bdab-9ee2247ed51f.jpg?v=1759488157"},{"product_id":"pyi-pss-shaft-seal-1-1-4-shaft-and-2-1-4-tube-02-114-214","title":"PYI - PSS Shaft Seal - 1-1\/4\" Shaft and 2-1\/4\" Tube - 02-114-214","description":"\u003cp\u003eThe PSS Shaft Seal\u003cbr\u003e\nis a mechanical face seal. The sealing surface is created between the flat surfaces of the rotating stainless-steel rotor and the stationary carbon flange. The stationary carbon flange is attached to the front side of the bellows with hose clamps, and the back end of the bellows fits over the Stern tube and is secured with hose clamps. The stainless-steel rotor is fitted on the shaft in front of the carbon flange. The stainless-steel rotor compresses the bellows before the rotor is secured to the shaft with set screws. This compression (pre-load) maintains constant contact between the two flat faces of the stainless-steel rotor and carbon flange, allowing the PSS to compensate for the variable fore and aft movement due to propeller thrust. In addition, the carbon flange is over-bored to the shaft diameter allowing it to “float” around the shaft and thus compensate for most misalignment and vibration problems. The stainless-steel rotor is sealed to the shaft by two O-rings recessed into the collar's bore. These O-rings rotate with the shaft and stainless-steel rotor and do not experience wear during operation.\u003cbr\u003e\nSpecifications:\u003cbr\u003e\nTemperature Limits\u003cbr\u003e\n5°F to 225°F (-15°C to 107°C)\u003cbr\u003e\nPressure Limits\u003cbr\u003e\n15 PSI (1 BAR)\u003cbr\u003e\nShaft RPM Limits\u003cbr\u003e\n10,000 RPM\u003c\/p\u003e","brand":"Pyi","offers":[{"title":"Default Title","offer_id":47802993082597,"sku":"SKU 162118","price":434.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/PSS-TypeA-ShaftSeal_f56f06d7-2a41-4e23-9a90-ff5d0fef1397.jpg?v=1759488158"},{"product_id":"pyi-pss-shaft-seal-1-1-2-shaft-and-2-1-2-tube-02-112-212","title":"PYI - PSS Shaft Seal - 1-1\/2\" Shaft and 2-1\/2\" Tube - 02-112-212","description":"\u003cp\u003eThe PSS Shaft Seal\u003cbr\u003e\nis a mechanical face seal. The sealing surface is created between the flat surfaces of the rotating stainless-steel rotor and the stationary carbon flange. The stationary carbon flange is attached to the front side of the bellows with hose clamps, and the back end of the bellows fits over the Stern tube and is secured with hose clamps. The stainless-steel rotor is fitted on the shaft in front of the carbon flange. The stainless-steel rotor compresses the bellows before the rotor is secured to the shaft with set screws. This compression (pre-load) maintains constant contact between the two flat faces of the stainless-steel rotor and carbon flange, allowing the PSS to compensate for the variable fore and aft movement due to propeller thrust. In addition, the carbon flange is over-bored to the shaft diameter allowing it to “float” around the shaft and thus compensate for most misalignment and vibration problems. The stainless-steel rotor is sealed to the shaft by two O-rings recessed into the collar's bore. These O-rings rotate with the shaft and stainless-steel rotor and do not experience wear during operation.\u003cbr\u003e\nSpecifications:\u003cbr\u003e\nTemperature Limits\u003cbr\u003e\n5°F to 225°F (-15°C to 107°C)\u003cbr\u003e\nPressure Limits\u003cbr\u003e\n15 PSI (1 BAR)\u003cbr\u003e\nShaft RPM Limits\u003cbr\u003e\n10,000 RPM\u003c\/p\u003e","brand":"Pyi","offers":[{"title":"Default Title","offer_id":47802993115365,"sku":"SKU 162106","price":685.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/PSS-TypeA-ShaftSeal_2b195fbb-69ac-4455-96f2-46063f5e92a4.jpg?v=1759488159"},{"product_id":"pyi-pss-shaft-seal-1-1-2-shaft-and-2-1-4-tube-02-112-214","title":"PYI - PSS Shaft Seal - 1-1\/2\" Shaft and 2-1\/4\" Tube - 02-112-214","description":"\u003cp\u003eThe PSS Shaft Seal\u003cbr\u003e\nis a mechanical face seal. The sealing surface is created between the flat surfaces of the rotating stainless-steel rotor and the stationary carbon flange. The stationary carbon flange is attached to the front side of the bellows with hose clamps, and the back end of the bellows fits over the Stern tube and is secured with hose clamps. The stainless-steel rotor is fitted on the shaft in front of the carbon flange. The stainless-steel rotor compresses the bellows before the rotor is secured to the shaft with set screws. This compression (pre-load) maintains constant contact between the two flat faces of the stainless-steel rotor and carbon flange, allowing the PSS to compensate for the variable fore and aft movement due to propeller thrust. In addition, the carbon flange is over-bored to the shaft diameter allowing it to “float” around the shaft and thus compensate for most misalignment and vibration problems. The stainless-steel rotor is sealed to the shaft by two O-rings recessed into the collar's bore. These O-rings rotate with the shaft and stainless-steel rotor and do not experience wear during operation.\u003cbr\u003e\nSpecifications:\u003cbr\u003e\nTemperature Limits\u003cbr\u003e\n5°F to 225°F (-15°C to 107°C)\u003cbr\u003e\nPressure Limits\u003cbr\u003e\n15 PSI (1 BAR)\u003cbr\u003e\nShaft RPM Limits\u003cbr\u003e\n10,000 RPM\u003c\/p\u003e","brand":"Pyi","offers":[{"title":"Default Title","offer_id":47802993148133,"sku":"SKU 162107","price":685.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/PSS-TypeA-ShaftSeal_eb167d2a-62ad-497d-9c96-89eef6b7bdf1.jpg?v=1759488160"},{"product_id":"pyi-pss-shaft-seal-1-1-8-shaft-and-2-tube-02-118-200","title":"PYI - PSS Shaft Seal - 1-1\/8\" Shaft and 2\" Tube - 02-118-200","description":"\u003cp\u003eThe PSS Shaft Seal\u003cbr\u003e\nis a mechanical face seal. The sealing surface is created between the flat surfaces of the rotating stainless-steel rotor and the stationary carbon flange. The stationary carbon flange is attached to the front side of the bellows with hose clamps, and the back end of the bellows fits over the Stern tube and is secured with hose clamps. The stainless-steel rotor is fitted on the shaft in front of the carbon flange. The stainless-steel rotor compresses the bellows before the rotor is secured to the shaft with set screws. This compression (pre-load) maintains constant contact between the two flat faces of the stainless-steel rotor and carbon flange, allowing the PSS to compensate for the variable fore and aft movement due to propeller thrust. In addition, the carbon flange is over-bored to the shaft diameter allowing it to “float” around the shaft and thus compensate for most misalignment and vibration problems. The stainless-steel rotor is sealed to the shaft by two O-rings recessed into the collar's bore. These O-rings rotate with the shaft and stainless-steel rotor and do not experience wear during operation.\u003cbr\u003e\nSpecifications:\u003cbr\u003e\nTemperature Limits\u003cbr\u003e\n5°F to 225°F (-15°C to 107°C)\u003cbr\u003e\nPressure Limits\u003cbr\u003e\n15 PSI (1 BAR)\u003cbr\u003e\nShaft RPM Limits\u003cbr\u003e\n10,000 RPM\u003c\/p\u003e","brand":"Pyi","offers":[{"title":"Default Title","offer_id":47802993180901,"sku":"SKU 162120","price":452.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/PSS-TypeA-ShaftSeal_451f3c50-8a36-42f1-ab40-ecee6886888f.jpg?v=1759488162"},{"product_id":"pyi-pss-shaft-seal-1-1-8-shaft-and-1-1-2-tube-02-114-214","title":"PYI - PSS Shaft Seal - 1-1\/8\" Shaft and 1-1\/2\" Tube - 02-118-112","description":"\u003cp\u003eThe PSS Shaft Seal\u003cbr\u003e\nis a mechanical face seal. The sealing surface is created between the flat surfaces of the rotating stainless-steel rotor and the stationary carbon flange. The stationary carbon flange is attached to the front side of the bellows with hose clamps, and the back end of the bellows fits over the Stern tube and is secured with hose clamps. The stainless-steel rotor is fitted on the shaft in front of the carbon flange. The stainless-steel rotor compresses the bellows before the rotor is secured to the shaft with set screws. This compression (pre-load) maintains constant contact between the two flat faces of the stainless-steel rotor and carbon flange, allowing the PSS to compensate for the variable fore and aft movement due to propeller thrust. In addition, the carbon flange is over-bored to the shaft diameter allowing it to “float” around the shaft and thus compensate for most misalignment and vibration problems. The stainless-steel rotor is sealed to the shaft by two O-rings recessed into the collar's bore. These O-rings rotate with the shaft and stainless-steel rotor and do not experience wear during operation.\u003cbr\u003e\nSpecifications:\u003cbr\u003e\nTemperature Limits\u003cbr\u003e\n5°F to 225°F (-15°C to 107°C)\u003cbr\u003e\nPressure Limits\u003cbr\u003e\n15 PSI (1 BAR)\u003cbr\u003e\nShaft RPM Limits\u003cbr\u003e\n10,000 RPM\u003c\/p\u003e","brand":"Pyi","offers":[{"title":"Default Title","offer_id":47802993213669,"sku":"SKU 162119","price":452.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/PSS-TypeA-ShaftSeal_cbb8f23b-1634-4f1d-9729-f67aca36bf8e.jpg?v=1759488163"},{"product_id":"pyi-pss-shaft-seal-1-3-4-shaft-and-2-3-4-tube-02-134-234","title":"PYI - PSS Shaft Seal - 1-3\/4\" Shaft and 2-3\/4\" Tube - 02-134-234","description":"\u003cp\u003eThe PSS Shaft Seal\u003cbr\u003e\nis a mechanical face seal. The sealing surface is created between the flat surfaces of the rotating stainless-steel rotor and the stationary carbon flange. The stationary carbon flange is attached to the front side of the bellows with hose clamps, and the back end of the bellows fits over the Stern tube and is secured with hose clamps. The stainless-steel rotor is fitted on the shaft in front of the carbon flange. The stainless-steel rotor compresses the bellows before the rotor is secured to the shaft with set screws. This compression (pre-load) maintains constant contact between the two flat faces of the stainless-steel rotor and carbon flange, allowing the PSS to compensate for the variable fore and aft movement due to propeller thrust. In addition, the carbon flange is over-bored to the shaft diameter allowing it to “float” around the shaft and thus compensate for most misalignment and vibration problems. The stainless-steel rotor is sealed to the shaft by two O-rings recessed into the collar's bore. These O-rings rotate with the shaft and stainless-steel rotor and do not experience wear during operation.\u003cbr\u003e\nSpecifications:\u003cbr\u003e\nTemperature Limits\u003cbr\u003e\n5°F to 225°F (-15°C to 107°C)\u003cbr\u003e\nPressure Limits\u003cbr\u003e\n15 PSI (1 BAR)\u003cbr\u003e\nShaft RPM Limits\u003cbr\u003e\n10,000 RPM\u003c\/p\u003e","brand":"Pyi","offers":[{"title":"Default Title","offer_id":47802993246437,"sku":"SKU 162121","price":749.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/PSS-TypeA-ShaftSeal_d88c60dd-2453-46a4-b19a-6c2475952e59.jpg?v=1759488164"},{"product_id":"pyi-pss-shaft-seal-2-1-4-shaft-and-3-1-2-tube-02-214-312","title":"PYI - PSS Shaft Seal - 2-1\/4\" Shaft and 3-1\/2\" Tube - 02-214-312","description":"\u003cp\u003eThe PSS Shaft Seal\u003cbr\u003e\nis a mechanical face seal. The sealing surface is created between the flat surfaces of the rotating stainless-steel rotor and the stationary carbon flange. The stationary carbon flange is attached to the front side of the bellows with hose clamps, and the back end of the bellows fits over the Stern tube and is secured with hose clamps. The stainless-steel rotor is fitted on the shaft in front of the carbon flange. The stainless-steel rotor compresses the bellows before the rotor is secured to the shaft with set screws. This compression (pre-load) maintains constant contact between the two flat faces of the stainless-steel rotor and carbon flange, allowing the PSS to compensate for the variable fore and aft movement due to propeller thrust. In addition, the carbon flange is over-bored to the shaft diameter allowing it to “float” around the shaft and thus compensate for most misalignment and vibration problems. The stainless-steel rotor is sealed to the shaft by two O-rings recessed into the collar's bore. These O-rings rotate with the shaft and stainless-steel rotor and do not experience wear during operation.\u003cbr\u003e\nSpecifications:\u003cbr\u003e\nTemperature Limits\u003cbr\u003e\n5°F to 225°F (-15°C to 107°C)\u003cbr\u003e\nPressure Limits\u003cbr\u003e\n15 PSI (1 BAR)\u003cbr\u003e\nShaft RPM Limits\u003cbr\u003e\n10,000 RPM\u003c\/p\u003e","brand":"Pyi","offers":[{"title":"Default Title","offer_id":47802993279205,"sku":"SKU 162134","price":1004.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/PSS-TypeA-ShaftSeal_f44f63ca-8494-44b5-9c05-48662603312d.jpg?v=1759488165"},{"product_id":"pyi-pss-shaft-seal-2-1-4-shaft-and-3-1-4-tube-02-214-314","title":"PYI - PSS Shaft Seal - 2-1\/4\" Shaft and 3-1\/4\" Tube - 02-214-314","description":"\u003cp\u003eThe PSS Shaft Seal\u003cbr\u003e\nis a mechanical face seal. The sealing surface is created between the flat surfaces of the rotating stainless-steel rotor and the stationary carbon flange. The stationary carbon flange is attached to the front side of the bellows with hose clamps, and the back end of the bellows fits over the Stern tube and is secured with hose clamps. The stainless-steel rotor is fitted on the shaft in front of the carbon flange. The stainless-steel rotor compresses the bellows before the rotor is secured to the shaft with set screws. This compression (pre-load) maintains constant contact between the two flat faces of the stainless-steel rotor and carbon flange, allowing the PSS to compensate for the variable fore and aft movement due to propeller thrust. In addition, the carbon flange is over-bored to the shaft diameter allowing it to “float” around the shaft and thus compensate for most misalignment and vibration problems. The stainless-steel rotor is sealed to the shaft by two O-rings recessed into the collar's bore. These O-rings rotate with the shaft and stainless-steel rotor and do not experience wear during operation.\u003cbr\u003e\nSpecifications:\u003cbr\u003e\nTemperature Limits\u003cbr\u003e\n5°F to 225°F (-15°C to 107°C)\u003cbr\u003e\nPressure Limits\u003cbr\u003e\n15 PSI (1 BAR)\u003cbr\u003e\nShaft RPM Limits\u003cbr\u003e\n10,000 RPM\u003c\/p\u003e","brand":"Pyi","offers":[{"title":"Default Title","offer_id":47802993311973,"sku":"SKU 162135","price":1004.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/PSS-TypeA-ShaftSeal_62a5c087-f856-417d-bc34-0a46d52c151f.jpg?v=1759488166"},{"product_id":"pyi-pss-shaft-seal-2-1-2-shaft-and-4-tube-02-212-400","title":"PYI - PSS Shaft Seal - 2-1\/2\" Shaft and 4\" Tube - 02-212-400","description":"\u003cp\u003eThe PSS Shaft Seal\u003cbr\u003e\nis a mechanical face seal. The sealing surface is created between the flat surfaces of the rotating stainless-steel rotor and the stationary carbon flange. The stationary carbon flange is attached to the front side of the bellows with hose clamps, and the back end of the bellows fits over the Stern tube and is secured with hose clamps. The stainless-steel rotor is fitted on the shaft in front of the carbon flange. The stainless-steel rotor compresses the bellows before the rotor is secured to the shaft with set screws. This compression (pre-load) maintains constant contact between the two flat faces of the stainless-steel rotor and carbon flange, allowing the PSS to compensate for the variable fore and aft movement due to propeller thrust. In addition, the carbon flange is over-bored to the shaft diameter allowing it to “float” around the shaft and thus compensate for most misalignment and vibration problems. The stainless-steel rotor is sealed to the shaft by two O-rings recessed into the collar's bore. These O-rings rotate with the shaft and stainless-steel rotor and do not experience wear during operation.\u003cbr\u003e\nSpecifications:\u003cbr\u003e\nTemperature Limits\u003cbr\u003e\n5°F to 225°F (-15°C to 107°C)\u003cbr\u003e\nPressure Limits\u003cbr\u003e\n15 PSI (1 BAR)\u003cbr\u003e\nShaft RPM Limits\u003cbr\u003e\n10,000 RPM\u003c\/p\u003e","brand":"Pyi","offers":[{"title":"Default Title","offer_id":47802993344741,"sku":"SKU 162133","price":1004.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/PSS-TypeA-ShaftSeal_487bf005-3dd1-4547-8af1-6f7623e7b399.jpg?v=1759488167"},{"product_id":"pyi-pss-shaft-seal-2-shaft-and-3-1-2-to-3-5-8-tube-02-200-312","title":"PYI - PSS Shaft Seal - 2\" Shaft and 3-1\/2\" to 3-5\/8\" Tube - 02-200-312","description":"\u003cp\u003eThe PSS Shaft Seal\u003cbr\u003e\nis a mechanical face seal. The sealing surface is created between the flat surfaces of the rotating stainless-steel rotor and the stationary carbon flange. The stationary carbon flange is attached to the front side of the bellows with hose clamps, and the back end of the bellows fits over the Stern tube and is secured with hose clamps. The stainless-steel rotor is fitted on the shaft in front of the carbon flange. The stainless-steel rotor compresses the bellows before the rotor is secured to the shaft with set screws. This compression (pre-load) maintains constant contact between the two flat faces of the stainless-steel rotor and carbon flange, allowing the PSS to compensate for the variable fore and aft movement due to propeller thrust. In addition, the carbon flange is over-bored to the shaft diameter allowing it to “float” around the shaft and thus compensate for most misalignment and vibration problems. The stainless-steel rotor is sealed to the shaft by two O-rings recessed into the collar's bore. These O-rings rotate with the shaft and stainless-steel rotor and do not experience wear during operation.\u003cbr\u003e\nSpecifications:\u003cbr\u003e\nTemperature Limits\u003cbr\u003e\n5°F to 225°F (-15°C to 107°C)\u003cbr\u003e\nPressure Limits\u003cbr\u003e\n15 PSI (1 BAR)\u003cbr\u003e\nShaft RPM Limits\u003cbr\u003e\n10,000 RPM\u003c\/p\u003e","brand":"Pyi","offers":[{"title":"Default Title","offer_id":47802993377509,"sku":"SKU 162129","price":881.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/PSS-TypeA-ShaftSeal_8bc2f616-4eab-4952-8365-194668d1ae26.jpg?v=1759488168"},{"product_id":"pyi-pss-shaft-seal-2-shaft-and-3-1-4-to-3-3-8-tube-02-200-314","title":"PYI - PSS Shaft Seal - 2\" Shaft and 3-1\/4\" to 3-3\/8\" Tube - 02-200-314","description":"\u003cp\u003eThe PSS Shaft Seal\u003cbr\u003e\nis a mechanical face seal. The sealing surface is created between the flat surfaces of the rotating stainless-steel rotor and the stationary carbon flange. The stationary carbon flange is attached to the front side of the bellows with hose clamps, and the back end of the bellows fits over the Stern tube and is secured with hose clamps. The stainless-steel rotor is fitted on the shaft in front of the carbon flange. The stainless-steel rotor compresses the bellows before the rotor is secured to the shaft with set screws. This compression (pre-load) maintains constant contact between the two flat faces of the stainless-steel rotor and carbon flange, allowing the PSS to compensate for the variable fore and aft movement due to propeller thrust. In addition, the carbon flange is over-bored to the shaft diameter allowing it to “float” around the shaft and thus compensate for most misalignment and vibration problems. The stainless-steel rotor is sealed to the shaft by two O-rings recessed into the collar's bore. These O-rings rotate with the shaft and stainless-steel rotor and do not experience wear during operation.\u003cbr\u003e\nSpecifications:\u003cbr\u003e\nTemperature Limits\u003cbr\u003e\n5°F to 225°F (-15°C to 107°C)\u003cbr\u003e\nPressure Limits\u003cbr\u003e\n15 PSI (1 BAR)\u003cbr\u003e\nShaft RPM Limits\u003cbr\u003e\n10,000 RPM\u003c\/p\u003e","brand":"Pyi","offers":[{"title":"Default Title","offer_id":47802993410277,"sku":"SKU 162130","price":881.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/PSS-TypeA-ShaftSeal_b611671c-c119-4ea5-b6a8-2bd681895bbc.jpg?v=1759488169"},{"product_id":"pyi-pss-shaft-seal-2-1-2-shaft-and-3-1-2-tube-02-212-312","title":"PYI - PSS Shaft Seal - 2-1\/2\" Shaft and 3-1\/2\" Tube - 02-212-312","description":"\u003cp\u003eThe PSS Shaft Seal\u003cbr\u003e\nis a mechanical face seal. The sealing surface is created between the flat surfaces of the rotating stainless-steel rotor and the stationary carbon flange. The stationary carbon flange is attached to the front side of the bellows with hose clamps, and the back end of the bellows fits over the Stern tube and is secured with hose clamps. The stainless-steel rotor is fitted on the shaft in front of the carbon flange. The stainless-steel rotor compresses the bellows before the rotor is secured to the shaft with set screws. This compression (pre-load) maintains constant contact between the two flat faces of the stainless-steel rotor and carbon flange, allowing the PSS to compensate for the variable fore and aft movement due to propeller thrust. In addition, the carbon flange is over-bored to the shaft diameter allowing it to “float” around the shaft and thus compensate for most misalignment and vibration problems. The stainless-steel rotor is sealed to the shaft by two O-rings recessed into the collar's bore. These O-rings rotate with the shaft and stainless-steel rotor and do not experience wear during operation.\u003cbr\u003e\nSpecifications:\u003cbr\u003e\nTemperature Limits\u003cbr\u003e\n5°F to 225°F (-15°C to 107°C)\u003cbr\u003e\nPressure Limits\u003cbr\u003e\n15 PSI (1 BAR)\u003cbr\u003e\nShaft RPM Limits\u003cbr\u003e\n10,000 RPM\u003c\/p\u003e","brand":"Pyi","offers":[{"title":"Default Title","offer_id":47802993443045,"sku":"SKU 162131","price":1004.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/PSS-TypeA-ShaftSeal_0cbc8429-a178-4927-a4f0-5eb1562c43ac.jpg?v=1759488170"},{"product_id":"pyi-pss-shaft-seal-2-1-2-shaft-and-3-3-4-tube-02-212-334","title":"PYI - PSS Shaft Seal - 2-1\/2\" Shaft and 3-3\/4\" Tube - 02-212-334","description":"\u003cp\u003eThe PSS Shaft Seal\u003cbr\u003e\nis a mechanical face seal. The sealing surface is created between the flat surfaces of the rotating stainless-steel rotor and the stationary carbon flange. The stationary carbon flange is attached to the front side of the bellows with hose clamps, and the back end of the bellows fits over the Stern tube and is secured with hose clamps. The stainless-steel rotor is fitted on the shaft in front of the carbon flange. The stainless-steel rotor compresses the bellows before the rotor is secured to the shaft with set screws. This compression (pre-load) maintains constant contact between the two flat faces of the stainless-steel rotor and carbon flange, allowing the PSS to compensate for the variable fore and aft movement due to propeller thrust. In addition, the carbon flange is over-bored to the shaft diameter allowing it to “float” around the shaft and thus compensate for most misalignment and vibration problems. The stainless-steel rotor is sealed to the shaft by two O-rings recessed into the collar's bore. These O-rings rotate with the shaft and stainless-steel rotor and do not experience wear during operation.\u003cbr\u003e\nSpecifications:\u003cbr\u003e\nTemperature Limits\u003cbr\u003e\n5°F to 225°F (-15°C to 107°C)\u003cbr\u003e\nPressure Limits\u003cbr\u003e\n15 PSI (1 BAR)\u003cbr\u003e\nShaft RPM Limits\u003cbr\u003e\n10,000 RPM\u003c\/p\u003e","brand":"Pyi","offers":[{"title":"Default Title","offer_id":47802993475813,"sku":"SKU 162132","price":1004.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/PSS-TypeA-ShaftSeal_6ee9bd89-24a9-4531-abc0-06d33e6224d3.jpg?v=1759488171"},{"product_id":"pyi-pss-shaft-seal-2-shaft-and-2-3-4-to-2-7-8-tube-02-200-234","title":"PYI - PSS Shaft Seal - 2\" Shaft and 2-3\/4 to 2-7\/8\" Tube - 02-200-234","description":"\u003cp\u003eThe PSS Shaft Seal\u003cbr\u003e\nis a mechanical face seal. The sealing surface is created between the flat surfaces of the rotating stainless-steel rotor and the stationary carbon flange. The stationary carbon flange is attached to the front side of the bellows with hose clamps, and the back end of the bellows fits over the Stern tube and is secured with hose clamps. The stainless-steel rotor is fitted on the shaft in front of the carbon flange. The stainless-steel rotor compresses the bellows before the rotor is secured to the shaft with set screws. This compression (pre-load) maintains constant contact between the two flat faces of the stainless-steel rotor and carbon flange, allowing the PSS to compensate for the variable fore and aft movement due to propeller thrust. In addition, the carbon flange is over-bored to the shaft diameter allowing it to “float” around the shaft and thus compensate for most misalignment and vibration problems. The stainless-steel rotor is sealed to the shaft by two O-rings recessed into the collar's bore. These O-rings rotate with the shaft and stainless-steel rotor and do not experience wear during operation.\u003cbr\u003e\nSpecifications:\u003cbr\u003e\nTemperature Limits\u003cbr\u003e\n5°F to 225°F (-15°C to 107°C)\u003cbr\u003e\nPressure Limits\u003cbr\u003e\n15 PSI (1 BAR)\u003cbr\u003e\nShaft RPM Limits\u003cbr\u003e\n10,000 RPM\u003c\/p\u003e","brand":"Pyi","offers":[{"title":"Default Title","offer_id":47802993541349,"sku":"SKU 162127","price":881.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/PSS-TypeA-ShaftSeal_223caafe-412c-4244-a313-6b92fb807639.jpg?v=1759488172"},{"product_id":"pyi-pss-shaft-seal-2-shaft-and-3-to-3-1-8-tube-02-200-300","title":"PYI - PSS Shaft Seal - 2\" Shaft and 3\" to 3-1\/8\" Tube - 02-200-300","description":"\u003cp\u003eThe PSS Shaft Seal\u003cbr\u003e\nis a mechanical face seal. The sealing surface is created between the flat surfaces of the rotating stainless-steel rotor and the stationary carbon flange. The stationary carbon flange is attached to the front side of the bellows with hose clamps, and the back end of the bellows fits over the Stern tube and is secured with hose clamps. The stainless-steel rotor is fitted on the shaft in front of the carbon flange. The stainless-steel rotor compresses the bellows before the rotor is secured to the shaft with set screws. This compression (pre-load) maintains constant contact between the two flat faces of the stainless-steel rotor and carbon flange, allowing the PSS to compensate for the variable fore and aft movement due to propeller thrust. In addition, the carbon flange is over-bored to the shaft diameter allowing it to “float” around the shaft and thus compensate for most misalignment and vibration problems. The stainless-steel rotor is sealed to the shaft by two O-rings recessed into the collar's bore. These O-rings rotate with the shaft and stainless-steel rotor and do not experience wear during operation.\u003cbr\u003e\nSpecifications:\u003cbr\u003e\nTemperature Limits\u003cbr\u003e\n5°F to 225°F (-15°C to 107°C)\u003cbr\u003e\nPressure Limits\u003cbr\u003e\n15 PSI (1 BAR)\u003cbr\u003e\nShaft RPM Limits\u003cbr\u003e\n10,000 RPM\u003c\/p\u003e","brand":"Pyi","offers":[{"title":"Default Title","offer_id":47802993574117,"sku":"SKU 162128","price":881.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/PSS-TypeA-ShaftSeal_b68e1161-1133-422b-8708-4f1bda07c567.jpg?v=1759488173"},{"product_id":"pyi-pss-shaft-seal-1-3-8-shaft-and-2-1-4-tube-02-138-214","title":"PYI - PSS Shaft Seal - 1-3\/8\" Shaft and 2-1\/4\" Tube - 02-138-214","description":"\u003cp\u003eThe PSS Shaft Seal\u003cbr\u003e\nis a mechanical face seal. The sealing surface is created between the flat surfaces of the rotating stainless-steel rotor and the stationary carbon flange. The stationary carbon flange is attached to the front side of the bellows with hose clamps, and the back end of the bellows fits over the Stern tube and is secured with hose clamps. The stainless-steel rotor is fitted on the shaft in front of the carbon flange. The stainless-steel rotor compresses the bellows before the rotor is secured to the shaft with set screws. This compression (pre-load) maintains constant contact between the two flat faces of the stainless-steel rotor and carbon flange, allowing the PSS to compensate for the variable fore and aft movement due to propeller thrust. In addition, the carbon flange is over-bored to the shaft diameter allowing it to “float” around the shaft and thus compensate for most misalignment and vibration problems. The stainless-steel rotor is sealed to the shaft by two O-rings recessed into the collar's bore. These O-rings rotate with the shaft and stainless-steel rotor and do not experience wear during operation.\u003cbr\u003e\nSpecifications:\u003cbr\u003e\nTemperature Limits\u003cbr\u003e\n5°F to 225°F (-15°C to 107°C)\u003cbr\u003e\nPressure Limits\u003cbr\u003e\n15 PSI (1 BAR)\u003cbr\u003e\nShaft RPM Limits\u003cbr\u003e\n10,000 RPM\u003c\/p\u003e","brand":"Pyi","offers":[{"title":"Default Title","offer_id":47802993606885,"sku":"SKU 162126","price":518.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/PSS-TypeA-ShaftSeal_3829cb93-97f8-4cba-87fd-f62660d58b2d.jpg?v=1759488174"},{"product_id":"pyi-pss-shaft-seal-1-3-8-shaft-and-2-tube-02-138-200","title":"PYI - PSS Shaft Seal - 1-3\/8\" Shaft and 2\" Tube - 02-138-200","description":"\u003cp\u003eThe PSS Shaft Seal\u003cbr\u003e\nis a mechanical face seal. The sealing surface is created between the flat surfaces of the rotating stainless-steel rotor and the stationary carbon flange. The stationary carbon flange is attached to the front side of the bellows with hose clamps, and the back end of the bellows fits over the Stern tube and is secured with hose clamps. The stainless-steel rotor is fitted on the shaft in front of the carbon flange. The stainless-steel rotor compresses the bellows before the rotor is secured to the shaft with set screws. This compression (pre-load) maintains constant contact between the two flat faces of the stainless-steel rotor and carbon flange, allowing the PSS to compensate for the variable fore and aft movement due to propeller thrust. In addition, the carbon flange is over-bored to the shaft diameter allowing it to “float” around the shaft and thus compensate for most misalignment and vibration problems. The stainless-steel rotor is sealed to the shaft by two O-rings recessed into the collar's bore. These O-rings rotate with the shaft and stainless-steel rotor and do not experience wear during operation.\u003cbr\u003e\nSpecifications:\u003cbr\u003e\nTemperature Limits\u003cbr\u003e\n5°F to 225°F (-15°C to 107°C)\u003cbr\u003e\nPressure Limits\u003cbr\u003e\n15 PSI (1 BAR)\u003cbr\u003e\nShaft RPM Limits\u003cbr\u003e\n10,000 RPM\u003c\/p\u003e","brand":"Pyi","offers":[{"title":"Default Title","offer_id":47802993639653,"sku":"SKU 162125","price":518.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/PSS-TypeA-ShaftSeal_f5e57c57-7d11-44aa-853a-6bdf77f83a64.jpg?v=1759488175"},{"product_id":"pyi-pss-shaft-seal-1-1-2-shaft-and-3-1-4-tube-02-112-314","title":"PYI - PSS Shaft Seal - 1-1\/2\" Shaft and 3-1\/4\" Tube - 02-112-314","description":"\u003cp\u003eThe PSS Shaft Seal\u003cbr\u003e\nis a mechanical face seal. The sealing surface is created between the flat surfaces of the rotating stainless-steel rotor and the stationary carbon flange. The stationary carbon flange is attached to the front side of the bellows with hose clamps, and the back end of the bellows fits over the Stern tube and is secured with hose clamps. The stainless-steel rotor is fitted on the shaft in front of the carbon flange. The stainless-steel rotor compresses the bellows before the rotor is secured to the shaft with set screws. This compression (pre-load) maintains constant contact between the two flat faces of the stainless-steel rotor and carbon flange, allowing the PSS to compensate for the variable fore and aft movement due to propeller thrust. In addition, the carbon flange is over-bored to the shaft diameter allowing it to “float” around the shaft and thus compensate for most misalignment and vibration problems. The stainless-steel rotor is sealed to the shaft by two O-rings recessed into the collar's bore. These O-rings rotate with the shaft and stainless-steel rotor and do not experience wear during operation.\u003cbr\u003e\nSpecifications:\u003cbr\u003e\nTemperature Limits\u003cbr\u003e\n5°F to 225°F (-15°C to 107°C)\u003cbr\u003e\nPressure Limits\u003cbr\u003e\n15 PSI (1 BAR)\u003cbr\u003e\nShaft RPM Limits\u003cbr\u003e\n10,000 RPM\u003c\/p\u003e","brand":"Pyi","offers":[{"title":"Default Title","offer_id":47802993705189,"sku":"SKU 162109","price":685.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/files\/PSS-TypeA-ShaftSeal_8865367c-d1c0-4d4b-a19a-8e8cddef5702.jpg?v=1759488178"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/6495\/0501\/collections\/sierra-bellows-38225-300x300-7034614.jpg?v=1777038575","url":"https:\/\/www.stevestonmarine.com\/collections\/drive-and-gearcase-parts.oembed?page=5","provider":"Steveston Marine and Hardware","version":"1.0","type":"link"}